1. Preparing your Environment for Installation

1.1. System Requirements

The following requirements apply to the networked base operating system:

  • x86_64 architecture

  • 4-core 2.0 GHz CPU at a minimum

  • Administrative user (root) access

  • A system umask of 0022

  • Full forward and reverse DNS resolution using a fully-qualified domain name

Before you install Smart Proxy server, ensure that your environment meets the requirements for installation.

Smart Proxy server must be installed on a freshly provisioned system that serves no other function except to run Smart Proxy server. The freshly provisioned system must not have the following users provided by external identity providers to avoid conflicts with the local users that Smart Proxy server creates:

  • apache

  • foreman

  • foreman-proxy

  • postgres

  • puppet

  • puppetserver

1.2. Supported Operating Systems

You can install the operating system from a disc, local ISO image, or kickstart.

The following operating systems are supported by the installer, have packages, and are tested for deploying Foreman:

Table 1. Operating Systems supported by foreman-installer

Operating System

Architecture

Notes

Ubuntu 18.04 (Bionic)

amd64

Debian 10 (Buster)

amd64

Before you install Foreman, apply all operating system updates if possible.

Install Smart Proxy server on a freshly provisioned system.

1.3. Ports and Firewalls Requirements

For the components of Foreman architecture to communicate, ensure that the required network ports are open and free on the base operating system. You must also ensure that the required network ports are open on any network-based firewalls.

The installation of a Smart Proxy server fails if the ports between Foreman server and Smart Proxy server are not open before installation starts.

Use this information to configure any network-based firewalls. Note that some cloud solutions must be specifically configured to allow communications between machines because they isolate machines similarly to network-based firewalls. If you use an application-based firewall, ensure that the application-based firewall permits all applications that are listed in the tables and known to your firewall. If possible, disable the application checking and allow open port communication based on the protocol.

Integrated Smart Proxy

Foreman server has an integrated Smart Proxy and any host that is directly connected to Foreman server is a Client of Foreman in the context of this section. This includes the base operating system on which Smart Proxy server is running.

Clients of Smart Proxy

Hosts which are clients of Smart Proxies, other than Foreman’s integrated Smart Proxy, do not need access to Foreman server. For more information on Foreman Topology, see Smart Proxy Networking in Planning for Foreman.

Required ports can change based on your configuration.

The following tables indicate the destination port and the direction of network traffic:

Table 2. Ports for Smart Proxy to Foreman Communication
Port Protocol Service Required For

5646

TCP

amqp

Smart Proxy’s Qpid dispatch router to Qpid dispatch router in Foreman

Some of the following ports apply only to deployments that use the Katello plug-in. For Debian deployments, ignore references to the Katello plug-in.

Table 3. Ports for Client to Smart Proxy Communication
8140 TCP HTTPS Puppet agent to Puppet master connections

8443

TCP

HTTPS

Subscription Management Services and Telemetry Services

9090

TCP

HTTPS

Sending SCAP reports to the Smart Proxy and for the discovery image during provisioning

53

TCP and UDP

DNS

Client DNS queries to a Smart Proxy’s DNS service (Optional)

67

UDP

DHCP

Client to Smart Proxy broadcasts, DHCP broadcasts for Client provisioning from a Smart Proxy (Optional)

69

UDP

TFTP

Clients downloading PXE boot image files from a Smart Proxy for provisioning (Optional)

Table 4. Ports for Smart Proxy to Client Communication
Port Protocol Service Required For

7

TCP and UDP

ICMP

DHCP Smart Proxy to Client network, ICMP ECHO to verify IP address is free (Optional)

68

UDP

DHCP

Smart Proxy to Client broadcasts, DHCP broadcasts for Client provisioning from a Smart Proxy (Optional)

8443

TCP

HTTP

Smart Proxy to Client "reboot" command to a discovered host during provisioning (Optional)

Any managed host that is directly connected to Foreman server is a client in this context because it is a client of the integrated Smart Proxy. This includes the base operating system on which a Smart Proxy server is running.

Table 5. Optional Network Ports
Port Protocol Service Required For

22

TCP

SSH

Foreman and Smart Proxy originated communications, for Remote Execution (Rex) and Ansible.

7911

TCP

DHCP

  • Smart Proxy originated commands for orchestration of DHCP records (local or external).

  • If DHCP is provided by an external service, you must open the port on the external server.

Note
A DHCP Smart Proxy sends an ICMP ECHO to confirm an IP address is free, no response of any kind is expected. ICMP can be dropped by a networked-based firewall, but any response prevents the allocation of IP addresses.

1.4. Enabling Connections from Smart Proxy server to Foreman server

On Foreman server, you must enable the incoming connection from Smart Proxy server to Foreman server and make this rule persistent across reboots.

Prerequisites
  • Ensure that the firewall rules on Foreman server are configured to enable connections for client to Foreman communication, because Smart Proxy server is a client of Foreman server. For more information, see Enabling Connections from a Client to Foreman server in Installing Foreman 2.4 server on Debian.

If you do not use firewall-cmd to configure the Linux firewall, implement using the command of your choice.

Procedure
  1. On Foreman server, enter the following command to open the port for Smart Proxy to Foreman communication:

    # firewall-cmd --add-port="5646/tcp"
  2. Make the changes persistent:

    # firewall-cmd --runtime-to-permanent

1.5. Enabling Connections from Foreman server and Clients to a Smart Proxy server

On the base operating system on which you want to install Smart Proxy, you must enable incoming connections from Foreman server and clients to Smart Proxy server and make these rules persistent across reboots.

If you do not use firewall-cmd to configure the Linux firewall, implement using the command of your choice.

Procedure
  1. On the base operating system on which you want to install Smart Proxy, enter the following command to open the ports for Foreman server and clients communication to Smart Proxy server:

    # firewall-cmd --add-port="53/udp" --add-port="53/tcp" \
    --add-port="67/udp" --add-port="69/udp" \
    --add-port="80/tcp" --add-port="443/tcp" \
    --add-port="5000/tcp" --add-port="5647/tcp" \
    --add-port="8000/tcp" --add-port="8140/tcp" \
    --add-port="8443/tcp" --add-port="9090/tcp"
  2. Make the changes persistent:

    # firewall-cmd --runtime-to-permanent

1.6. Verifying Firewall Settings

Use this procedure to verify your changes to the firewall settings.

If you do not use firewall-cmd to configure the Linux firewall, implement using the command of your choice.

Procedure
  1. Enter the following command:

    # firewall-cmd --list-all

2. Installing Smart Proxy server

Before you install Smart Proxy server, you must ensure that your environment meets the requirements for installation. For more information, see Preparing your Environment for Installation.

2.1. Configuring Repositories

Use the following procedure to enable the repositories that are required to install Foreman.

Procedure
  1. Add the Debian repository sources to the /etc/apt/sources.list.d/foreman.list file:

    # echo "deb http://deb.theforeman.org/ buster 2.4" | tee /etc/apt/sources.list.d/foreman.list
    # echo "deb http://deb.theforeman.org/ plugins 2.4" | tee -a /etc/apt/sources.list.d/foreman.list
  2. Install the ca-certificates and gpg packages:

    # apt-get -y install ca-certificates gpg
  3. Download and add the public GPG key:

    # wget -q https://deb.theforeman.org/pubkey.gpg -O- | apt-key add -

2.2. Installing Smart Proxy server Packages

Before installing Smart Proxy server packages, you must update all packages that are installed on the base operating system.

Procedure

To install Smart Proxy server, complete the following steps:

  1. Update all packages:

    # apt-get upgrade
  2. Install the foreman-proxy-content package:

    # apt-get install foreman-proxy-content

2.3. Installing Smart Proxy server

Procedure
  • To install an external Smart Proxy, enter the following command:

    foreman-installer \
      --no-enable-foreman \
      --no-enable-foreman-cli \
      --enable-puppet \
      --puppet-server-ca=false \
      --puppet-server-foreman-url=https://foreman.example.com \
      --enable-foreman-proxy \
      --foreman-proxy-puppetca=false \
      --foreman-proxy-tftp=false \
      --foreman-proxy-foreman-base-url=https://foreman.example.com \
      --foreman-proxy-trusted-hosts=foreman.example.com \
      --foreman-proxy-oauth-consumer-key=oAuth_Consumer_Key \
      --foreman-proxy-oauth-consumer-secret=oAuth_Consumer_Secret

2.4. Synchronizing the System Clock With chronyd

To minimize the effects of time drift, you must synchronize the system clock on the base operating system on which you want to install Smart Proxy server with Network Time Protocol (NTP) servers. If the base operating system clock is configured incorrectly, certificate verification might fail.

For more information about the chrony suite, see Configuring NTP Using the chrony Suite in the Red Hat Enterprise Linux 7 System Administrator’s Guide.

Procedure
  1. Install the chrony package:

    # apt-get install chrony
  2. Start and enable the chronyd service:

    # systemctl start chronyd
    # systemctl enable chronyd

2.5. Assigning the Correct Organization and Location to Smart Proxy server in the Foreman web UI

After installing Smart Proxy server packages, if there is more than one organization or location, you must assign the correct organization and location to Smart Proxy to make Smart Proxy visible in the Foreman web UI.

Procedure
  1. Log into the Foreman web UI.

  2. From the Organization list in the upper-left of the screen, select Any Organization.

  3. From the Location list in the upper-left of the screen, select Any Location.

  4. Navigate to Hosts > All Hosts and select Smart Proxy server.

  5. From the Select Actions list, select Assign Organization.

  6. From the Organization list, select the organization where you want to assign this Smart Proxy.

  7. Click Fix Organization on Mismatch.

  8. Click Submit.

  9. Select Smart Proxy server. From the Select Actions list, select Assign Location.

  10. From the Location list, select the location where you want to assign this Smart Proxy.

  11. Click Fix Location on Mismatch.

  12. Click Submit.

  13. Navigate to Administer > Organizations and click the organization to which you have assigned Smart Proxy.

  14. Click Smart Proxies tab and ensure that Smart Proxy server is listed under the Selected items list, then click Submit.

  15. Navigate to Administer > Locations and click the location to which you have assigned Smart Proxy.

  16. Click Smart Proxies tab and ensure that Smart Proxy server is listed under the Selected items list, then click Submit.

Verification

Optionally, you can verify if Smart Proxy server is correctly listed in the Foreman web UI.

  1. Select the organization from the Organization list.

  2. Select the location from the Location list.

  3. Navigate to Hosts > All Hosts.

  4. Navigate to Infrastructure > Smart Proxies.

2.6. Configuring Smart Proxy server with a Default SSL Certificate

Use this section to configure Smart Proxy server with an SSL certificate that is signed by Foreman server default Certificate Authority (CA).

Prerequisites
Procedure
  1. On Foreman server, to store all the source certificate files for your Smart Proxy server, create a directory that is accessible only to the root user, for example /root/smart-proxy_cert:

    # mkdir /root/smart-proxy_cert
  2. On Foreman server, generate the /root/smart-proxy_cert/smart-proxy_certs.tar certificate archive for your Smart Proxy server:

    # foreman-proxy-certs-generate \
    --foreman-proxy-fqdn smartproxy.example.com \
    --certs-tar /root/smart-proxy_cert/smart-proxy_certs.tar

    Retain a copy of the foreman-installer command that the foreman-proxy-certs-generate command returns for deploying the certificate to your Smart Proxy server.

    Example output of foreman-proxy-certs-generate
    output omitted
    foreman-installer \
    --scenario foreman-proxy-content \
    --certs-tar-file                              "/root/smart-proxy_certs.tar"\
    --foreman-proxy-content-parent-fqdn           "foreman.example.com"\
    --foreman-proxy-register-in-foreman           "true"\
    --foreman-proxy-foreman-base-url              "https://foreman.example.com"\
    --foreman-proxy-trusted-hosts                 "foreman.example.com"\
    --foreman-proxy-trusted-hosts                 "smartproxy.example.com"\
    --foreman-proxy-oauth-consumer-key            "s97QxvUAgFNAQZNGg4F9zLq2biDsxM7f"\
    --foreman-proxy-oauth-consumer-secret         "6bpzAdMpRAfYaVZtaepYetomgBVQ6ehY"\
    --puppet-server-foreman-url                   "https://foreman.example.com"
  3. On Foreman server, copy the certificate archive file to your Smart Proxy server:

    # scp /root/smart-proxy_cert/smartproxy.example.com-certs.tar \
    root@smartproxy.example.com:/root/smartproxy.example.com-certs.tar
  4. On Smart Proxy server, to deploy the certificate, enter the foreman-installer command that the foreman-proxy-certs-generate command returns.

    When network connections or ports to Foreman are not yet open, you can set the --foreman-proxy-register-in-foreman option to false to prevent Smart Proxy from attempting to connect to Foreman and reporting errors. Run the installer again with this option set to true when the network and firewalls are correctly configured.

    Important
    Do not delete the certificate archive file after you deploy the certificate. It is required, for example, when upgrading Smart Proxy server.

3. Performing Additional Configuration on Smart Proxy server

Use this chapter to configure additional settings on your Smart Proxy server.

3.1. Enabling OpenSCAP on External Smart Proxies

On Foreman server and the integrated Smart Proxy of your Foreman server, OpenSCAP is enabled by default.

To use the OpenSCAP plug-in and content on an external Smart Proxy, you must enable OpenSCAP on each Smart Proxy.

Procedure
  • To enable OpenSCAP, enter the following command:

    # foreman-installer --no-enable-foreman \
    --enable-foreman-proxy-plugin-openscap

3.2. Enabling Power Management on Managed Hosts

To perform power management tasks on managed hosts using the intelligent platform management interface (IPMI) or a similar protocol, you must enable the baseboard management controller (BMC) module on Smart Proxy server.

Prerequisites
Procedure
  • To enable BMC, enter the following command:

    # foreman-installer --no-enable-foreman \
    --foreman-proxy-bmc "true" \
    --foreman-proxy-bmc-default-provider "freeipmi"

3.3. Configuring DNS, DHCP, and TFTP on Smart Proxy server

To configure the DNS, DHCP, and TFTP services on Smart Proxy server, use the foreman-installer command with the options appropriate for your environment. To view a complete list of configurable options, enter the foreman-installer --scenario foreman --help command.

Any changes to the settings require entering the foreman-installer command again. You can enter the command multiple times and each time it updates all configuration files with the changed values.

Adding Multihomed DHCP details

If you want to use Multihomed DHCP, you must inform the installer.

Prerequisites
  • You must have the correct network name (dns-interface) for the DNS server.

  • You must have the correct interface name (dhcp-interface) for the DHCP server.

  • Contact your network administrator to ensure that you have the correct settings.

Procedure
  • Enter the foreman-installer command with the options appropriate for your environment. The following example shows configuring full provisioning services:

    # foreman-installer --no-enable-foreman \
    --foreman-proxy-dns true \
    --foreman-proxy-dns-managed true \
    --foreman-proxy-dns-interface eth0 \
    --foreman-proxy-dns-zone example.com \
    --foreman-proxy-dns-reverse 2.0.192.in-addr.arpa \
    --foreman-proxy-dhcp true \
    --foreman-proxy-dhcp-managed true \
    --foreman-proxy-dhcp-interface eth0 \
    --foreman-proxy-dhcp-additional-interfaces eth1 \
    --foreman-proxy-dhcp-additional-interfaces eth2 \
    --foreman-proxy-dhcp-range "192.0.2.100 192.0.2.150" \
    --foreman-proxy-dhcp-gateway 192.0.2.1 \
    --foreman-proxy-dhcp-nameservers 192.0.2.2 \
    --foreman-proxy-tftp true \
    --foreman-proxy-tftp-managed true \
    --foreman-proxy-tftp-servername 192.0.2.3

For more information about configuring DHCP, DNS, and TFTP services, see the Configuring Network Services section in the Provisioning Guide.

4. Configuring Smart Proxy server with External Services

If you do not want to configure the DNS, DHCP, and TFTP services on Smart Proxy server, use this section to configure your Smart Proxy server to work with external DNS, DHCP and TFTP services.

4.1. Configuring Smart Proxy server with External DNS

You can configure Smart Proxy server with external DNS. Smart Proxy server uses the nsupdate utility to update DNS records on the remote server.

To make any changes persistent, you must enter the foreman-installer command with the options appropriate for your environment.

Prerequisites
  • You must have a configured external DNS server.

Procedure
  1. Install the bind-utils package:

    # apt-get install bind9
  2. Copy the /etc/rndc.key file from the external DNS server to Smart Proxy server:

    # scp root@dns.example.com:/etc/rndc.key /etc/rndc.key
  3. Configure the ownership, permissions, and SELinux context:

    # restorecon -v /etc/rndc.key
    # chown -v root:named /etc/rndc.key
    # chmod -v 640 /etc/rndc.key
  4. To test the nsupdate utility, add a host remotely:

    # echo -e "server DNS_IP_Address\n \
    update add aaa.virtual.lan 3600 IN A Host_IP_Address\n \
    send\n" | nsupdate -k /etc/rndc.key
    # nslookup aaa.virtual.lan DNS_IP_Address
    # echo -e "server DNS_IP_Address\n \
    update delete aaa.virtual.lan 3600 IN A Host_IP_Address\n \
    send\n" | nsupdate -k /etc/rndc.key
  5. Assign the foreman-proxy user to the named group manually. Normally, foreman-installer ensures that the foreman-proxy user belongs to the named UNIX group, however, in this scenario Foreman does not manage users and groups, therefore you need to assign the foreman-proxy user to the named group manually.

    # usermod -a -G named foreman-proxy
  6. Enter the foreman-installer command to make the following persistent changes to the /etc/foreman-proxy/settings.d/dns.yml file:

    # foreman-installer --foreman-proxy-dns=true \
    --foreman-proxy-dns-managed=false \
    --foreman-proxy-dns-provider=nsupdate \
    --foreman-proxy-dns-server="DNS_IP_Address" \
    --foreman-proxy-keyfile=/etc/rndc.key \
    --foreman-proxy-dns-ttl=86400
  7. Restart the foreman-proxy service:

    # systemctl restart foreman-proxy
  8. Log in to Foreman server web UI.

  9. Navigate to Infrastructure > Smart Proxies, locate the Smart Proxy server, and from the list in the Actions column, select Refresh.

  10. Associate the DNS service with the appropriate subnets and domain.

4.2. Configuring Smart Proxy server with External DHCP

To configure Smart Proxy server with external DHCP, you must complete the following procedures:

4.2.1. Configuring an External DHCP Server to Use with Smart Proxy server

To configure an external DHCP server to use with Smart Proxy server, on a Red Hat Enterprise Linux server, you must install the ISC DHCP Service and Berkeley Internet Name Domain (BIND) packages. You must also share the DHCP configuration and lease files with Smart Proxy server. The example in this procedure uses the distributed Network File System (NFS) protocol to share the DHCP configuration and lease files.

Note
If you use dnsmasq as an external DHCP server, enable the dhcp-no-override setting. This is required because Foreman creates configuration files on the TFTP server under the grub2/ subdirectory. If the dhcp-no-override setting is disabled, clients fetch the bootloader and its configuration from the root directory, which might cause an error.

If you do not use firewall-cmd to configure the Linux firewall, implement using the command of your choice.

Procedure
  1. On a Red Hat Enterprise Linux Server server, install the ISC DHCP Service and Berkeley Internet Name Domain (BIND) packages:

    # apt-get install dhcp bind
  2. Generate a security token:

    # dnssec-keygen -a HMAC-MD5 -b 512 -n HOST omapi_key

    As a result, a key pair that consists of two files is created in the current directory.

  3. Copy the secret hash from the key:

    # cat Komapi_key.+*.private |grep ^Key|cut -d ' ' -f2
  4. Edit the dhcpd configuration file for all of the subnets and add the key. The following is an example:

    # cat /etc/dhcp/dhcpd.conf
    default-lease-time 604800;
    max-lease-time 2592000;
    log-facility local7;
    
    subnet 192.168.38.0 netmask 255.255.255.0 {
    	range 192.168.38.10 192.168.38.100;
    	option routers 192.168.38.1;
    	option subnet-mask 255.255.255.0;
    	option domain-search "virtual.lan";
    	option domain-name "virtual.lan";
    	option domain-name-servers 8.8.8.8;
    }
    
    omapi-port 7911;
    key omapi_key {
    	algorithm HMAC-MD5;
    	secret "jNSE5YI3H1A8Oj/tkV4...A2ZOHb6zv315CkNAY7DMYYCj48Umw==";
    };
    omapi-key omapi_key;

    Note that the option routers value is the Foreman or Smart Proxy IP address that you want to use with an external DHCP service.

  5. Delete the two key files from the directory that they were created in.

  6. On Foreman server, define each subnet. Do not set DHCP Smart Proxy for the defined Subnet yet.

    To prevent conflicts, set up the lease and reservation ranges separately. For example, if the lease range is 192.168.38.10 to 192.168.38.100, in the Foreman web UI define the reservation range as 192.168.38.101 to 192.168.38.250.

  7. Configure the firewall for external access to the DHCP server:

    # firewall-cmd --add-service dhcp \
    && firewall-cmd --runtime-to-permanent
  8. On Foreman server, determine the UID and GID of the foreman user:

    # id -u foreman
    993
    # id -g foreman
    990
  9. On the DHCP server, create the foreman user and group with the same IDs as determined in a previous step:

    # groupadd -g 990 foreman
    # useradd -u 993 -g 990 -s /sbin/nologin foreman
  10. To ensure that the configuration files are accessible, restore the read and execute flags:

    # chmod o+rx /etc/dhcp/
    # chmod o+r /etc/dhcp/dhcpd.conf
    # chattr +i /etc/dhcp/ /etc/dhcp/dhcpd.conf
  11. Start the DHCP service:

    # systemctl start dhcpd
  12. Export the DHCP configuration and lease files using NFS:

    # apt-get install nfs-kernel-server nfs-common
    # systemctl enable rpcbind nfs-server
    # systemctl start rpcbind nfs-server nfs-idmapd
  13. Create directories for the DHCP configuration and lease files that you want to export using NFS:

    # mkdir -p /exports/var/lib/dhcpd /exports/etc/dhcp
  14. To create mount points for the created directories, add the following line to the /etc/fstab file:

    /var/lib/dhcpd /exports/var/lib/dhcpd none bind,auto 0 0
    /etc/dhcp /exports/etc/dhcp none bind,auto 0 0
  15. Mount the file systems in /etc/fstab:

    # mount -a
  16. Ensure the following lines are present in /etc/exports:

    /exports 192.168.38.1(rw,async,no_root_squash,fsid=0,no_subtree_check)
    
    /exports/etc/dhcp 192.168.38.1(ro,async,no_root_squash,no_subtree_check,nohide)
    
    /exports/var/lib/dhcpd 192.168.38.1(ro,async,no_root_squash,no_subtree_check,nohide)

    Note that the IP address that you enter is the Foreman or Smart Proxy IP address that you want to use with an external DHCP service.

  17. Reload the NFS server:

    # exportfs -rva
  18. Configure the firewall for the DHCP omapi port 7911:

    # firewall-cmd --add-port="7911/tcp" \
    && firewall-cmd --runtime-to-permanent
  19. Optional: Configure the firewall for external access to NFS. Clients are configured using NFSv3.

    # firewall-cmd --zone public --add-service mountd \
    && firewall-cmd --zone public --add-service rpc-bind \
    && firewall-cmd --zone public --add-service nfs \
    && firewall-cmd --runtime-to-permanent

4.2.2. Configuring Smart Proxy server with an External DHCP Server

You can configure Smart Proxy server with an external DHCP server.

Prerequisite
Procedure
  1. Install the nfs-utils utility:

    # apt-get install nfs-kernel-server nfs-common
  2. Create the DHCP directories for NFS:

    # mkdir -p /mnt/nfs/etc/dhcp /mnt/nfs/var/lib/dhcpd
  3. Change the file owner:

    # chown -R foreman-proxy /mnt/nfs
  4. Verify communication with the NFS server and the Remote Procedure Call (RPC) communication paths:

    # showmount -e DHCP_Server_FQDN
    # rpcinfo -p DHCP_Server_FQDN
  5. Add the following lines to the /etc/fstab file:

    DHCP_Server_FQDN:/exports/etc/dhcp /mnt/nfs/etc/dhcp nfs
    ro,vers=3,auto,nosharecache,context="system_u:object_r:dhcp_etc_t:s0" 0 0
    
    DHCP_Server_FQDN:/exports/var/lib/dhcpd /mnt/nfs/var/lib/dhcpd nfs
    ro,vers=3,auto,nosharecache,context="system_u:object_r:dhcpd_state_t:s0" 0 0
  6. Mount the file systems on /etc/fstab:

    # mount -a
  7. To verify that the foreman-proxy user can access the files that are shared over the network, display the DHCP configuration and lease files:

    # su foreman-proxy -s /bin/bash
    bash-4.2$ cat /mnt/nfs/etc/dhcp/dhcpd.conf
    bash-4.2$ cat /mnt/nfs/var/lib/dhcpd/dhcpd.leases
    bash-4.2$ exit
  8. Enter the foreman-installer command to make the following persistent changes to the /etc/foreman-proxy/settings.d/dhcp.yml file:

    # foreman-installer --foreman-proxy-dhcp=true \
    --foreman-proxy-dhcp-provider=remote_isc \
    --foreman-proxy-plugin-dhcp-remote-isc-dhcp-config /mnt/nfs/etc/dhcp/dhcpd.conf \
    --foreman-proxy-plugin-dhcp-remote-isc-dhcp-leases /mnt/nfs/var/lib/dhcpd/dhcpd.leases \
    --foreman-proxy-plugin-dhcp-remote-isc-key-name=omapi_key \
    --foreman-proxy-plugin-dhcp-remote-isc-key-secret=jNSE5YI3H1A8Oj/tkV4...A2ZOHb6zv315CkNAY7DMYYCj48Umw== \
    --foreman-proxy-plugin-dhcp-remote-isc-omapi-port=7911 \
    --enable-foreman-proxy-plugin-dhcp-remote-isc \
    --foreman-proxy-dhcp-server=DHCP_Server_FQDN
  9. Restart the foreman-proxy service:

    # systemctl restart foreman-proxy
  10. Log in to Foreman server web UI.

  11. Navigate to Infrastructure > Smart Proxies, locate the Smart Proxy server, and from the list in the Actions column, select Refresh.

  12. Associate the DHCP service with the appropriate subnets and domain.

4.3. Configuring Smart Proxy server with External TFTP

You can configure Smart Proxy server with external TFTP services.

Procedure
  1. Create the TFTP directory for NFS:

    # mkdir -p /mnt/nfs/var/lib/tftpboot
  2. In the /etc/fstab file, add the following line:

    TFTP_Server_IP_Address:/exports/var/lib/tftpboot /mnt/nfs/var/lib/tftpboot nfs rw,vers=3,auto,nosharecache,context="system_u:object_r:tftpdir_rw_t:s0" 0 0
  3. Mount the file systems in /etc/fstab:

    # mount -a
  4. Enter the foreman-installer command to make the following persistent changes to the /etc/foreman-proxy/settings.d/tftp.yml file:

    # foreman-installer --foreman-proxy-tftp=true \
    --foreman-proxy-tftp-root /mnt/nfs/var/lib/tftpboot
  5. If the TFTP service is running on a different server than the DHCP service, update the tftp_servername setting with the FQDN or IP address of the server that the TFTP service is running on:

    # foreman-installer --foreman-proxy-tftp-servername=TFTP_Server_FQDN
  6. Log in to Foreman server web UI.

  7. Navigate to Infrastructure > Smart Proxies, locate the Smart Proxy server, and from the list in the Actions column, select Refresh.

  8. Associate the TFTP service with the appropriate subnets and domain.

4.4. Configuring Smart Proxy server with External IdM DNS

When Foreman server adds a DNS record for a host, it first determines which Smart Proxy is providing DNS for that domain. It then communicates with the Smart Proxy that is configured to provide DNS service for your deployment and adds the record. The hosts are not involved in this process. Therefore, you must install and configure the IdM client on the Foreman or Smart Proxy that is currently configured to provide a DNS service for the domain you want to manage using the IdM server.

Smart Proxy server can be configured to use a Red Hat Identity Management (IdM) server to provide DNS service. For more information about Red Hat Identity Management, see the Linux Domain Identity, Authentication, and Policy Guide.

To configure Smart Proxy server to use a Red Hat Identity Management (IdM) server to provide DNS service, use one of the following procedures:

To revert to internal DNS service, use the following procedure:

Note
You are not required to use Smart Proxy server to manage DNS. When you are using the realm enrollment feature of Foreman, where provisioned hosts are enrolled automatically to IdM, the ipa-client-install script creates DNS records for the client. Configuring Smart Proxy server with external IdM DNS and realm enrollment are mutually exclusive. For more information about configuring realm enrollment, see External Authentication for Provisioned Hosts in Administering Foreman.

4.4.1. Configuring Dynamic DNS Update with GSS-TSIG Authentication

You can configure the IdM server to use the generic security service algorithm for secret key transaction (GSS-TSIG) technology defined in RFC3645. To configure the IdM server to use the GSS-TSIG technology, you must install the IdM client on the Smart Proxy server base operating system.

Prerequisites
  • You must ensure the IdM server is deployed and the host-based firewall is configured correctly. For more information, see Port Requirements in the Linux Domain Identity, Authentication, and Policy Guide.

  • You must contact the IdM server administrator to ensure that you obtain an account on the IdM server with permissions to create zones on the IdM server.

  • You must confirm whether Foreman server or Smart Proxy server is configured to provide DNS service for your deployment.

  • You must configure DNS, DHCP and TFTP services on the base operating system of either the Foreman or Smart Proxy that is managing the DNS service for your deployment.

  • You must create a backup of the answer file. You can use the backup to restore the answer file to its original state if it becomes corrupted. For more information, see Configuring Foreman server.

Procedure

To configure dynamic DNS update with GSS-TSIG authentication, complete the following steps:

Creating a Kerberos Principal on the IdM Server
  1. Obtain a Kerberos ticket for the account obtained from the IdM administrator:

    # kinit idm_user
  2. Create a new Kerberos principal for Smart Proxy server to use to authenticate on the IdM server.

    # ipa service-add smartproxy.example.com
Installing and Configuring the IdM Client
  1. On the base operating system of either the Foreman or Smart Proxy that is managing the DNS service for your deployment, install the ipa-client package:

    # apt-get install ipa-client
  2. Configure the IdM client by running the installation script and following the on-screen prompts:

    # ipa-client-install
  3. Obtain a Kerberos ticket:

    # kinit admin
  4. Remove any preexisting keytab:

    # rm /etc/foreman-proxy/dns.keytab
  5. Obtain the keytab for this system:

    # ipa-getkeytab -p smart-proxy/foreman.example.com@EXAMPLE.COM \
    -s idm1.example.com -k /etc/foreman-proxy/dns.keytab
    Note

    When adding a keytab to a standby system with the same host name as the original system in service, add the r option to prevent generating new credentials and rendering the credentials on the original system invalid.

  6. For the dns.keytab file, set the group and owner to foreman-proxy:

    # chown foreman-proxy:foreman-proxy /etc/foreman-proxy/dns.keytab
  7. Optional: To verify that the keytab file is valid, enter the following command:

    # kinit -kt /etc/foreman-proxy/dns.keytab \
    smart-proxy/foreman.example.com@EXAMPLE.COM
Configuring DNS Zones in the IdM web UI
  1. Create and configure the zone that you want to manage:

    1. Navigate to Network Services > DNS > DNS Zones.

    2. Select Add and enter the zone name. For example, example.com.

    3. Click Add and Edit.

    4. Click the Settings tab and in the BIND update policy box, add the following to the semi-colon separated list:

      grant smart-proxy/047foreman.example.com@EXAMPLE.COM wildcard * ANY;
    5. Set Dynamic update to True.

    6. Enable Allow PTR sync.

    7. Click Save to save the changes.

  2. Create and configure the reverse zone:

    1. Navigate to Network Services > DNS > DNS Zones.

    2. Click Add.

    3. Select Reverse zone IP network and add the network address in CIDR format to enable reverse lookups.

    4. Click Add and Edit.

    5. Click the Settings tab and in the BIND update policy box, add the following to the semi-colon separated list:

      grant smart-proxy\047foreman.example.com@EXAMPLE.COM wildcard * ANY;
    6. Set Dynamic update to True.

    7. Click Save to save the changes.

Configuring the Foreman or Smart Proxy server that Manages the DNS Service for the Domain
  1. Use the foreman-installer command to configure the Foreman or Smart Proxy that manages the DNS Service for the domain:

    • On Foreman, enter the following command:

      foreman-installer --scenario foreman \
      --foreman-proxy-dns=true \
      --foreman-proxy-dns-managed=true \
      --foreman-proxy-dns-provider=nsupdate_gss \
      --foreman-proxy-dns-server="idm1.example.com" \
      --foreman-proxy-dns-tsig-principal="smart-proxy/foreman.example.com@EXAMPLE.COM" \
      --foreman-proxy-dns-tsig-keytab=/etc/foreman-proxy/dns.keytab \
      --foreman-proxy-dns-reverse="55.168.192.in-addr.arpa" \
      --foreman-proxy-dns-zone=example.com \
      --foreman-proxy-dns-ttl=86400
    • On Smart Proxy, enter the following command:

      foreman-installer --no-enable-foreman \
      --foreman-proxy-dns=true \
      --foreman-proxy-dns-managed=true \
      --foreman-proxy-dns-provider=nsupdate_gss \
      --foreman-proxy-dns-server="idm1.example.com" \
      --foreman-proxy-dns-tsig-principal="smart-proxy/foreman.example.com@EXAMPLE.COM" \
      --foreman-proxy-dns-tsig-keytab=/etc/foreman-proxy/dns.keytab \
      --foreman-proxy-dns-reverse="55.168.192.in-addr.arpa" \
      --foreman-proxy-dns-zone=example.com \
      --foreman-proxy-dns-ttl=86400
  2. Restart the Foreman or Smart Proxy’s Proxy Service.

    # systemctl restart foreman-proxy

After you run the foreman-installer command to make any changes to your Smart Proxy configuration, you must update the configuration of each affected Smart Proxy in the Foreman web UI.

Updating the Configuration in the Foreman web UI
  1. Navigate to Infrastructure > Smart Proxies, locate the Smart Proxy server, and from the list in the Actions column, select Refresh.

  2. Configure the domain:

    1. Navigate to Infrastructure > Domains and select the domain name.

    2. In the Domain tab, ensure DNS Smart Proxy is set to the Smart Proxy where the subnet is connected.

  3. Configure the subnet:

    1. Navigate to Infrastructure > Subnets and select the subnet name.

    2. In the Subnet tab, set IPAM to None.

    3. In the Domains tab, select the domain that you want to manage using the IdM server.

    4. In the Smart Proxies tab, ensure Reverse DNS Smart Proxy is set to the Smart Proxy where the subnet is connected.

    5. Click Submit to save the changes.

4.4.2. Configuring Dynamic DNS Update with TSIG Authentication

You can configure an IdM server to use the secret key transaction authentication for DNS (TSIG) technology that uses the rndc.key key file for authentication. The TSIG protocol is defined in RFC2845.

Prerequisites
  • You must ensure the IdM server is deployed and the host-based firewall is configured correctly. For more information, see Port Requirements in the Linux Domain Identity, Authentication, and Policy Guide.

  • You must obtain root user access on the IdM server.

  • You must confirm whether Foreman server or Smart Proxy server is configured to provide DNS service for your deployment.

  • You must configure DNS, DHCP and TFTP services on the base operating system of either the Foreman or Smart Proxy that is managing the DNS service for your deployment.

  • You must create a backup of the answer file. You can use the backup to restore the answer file to its original state if it becomes corrupted. For more information, see Configuring Foreman server.

Procedure

To configure dynamic DNS update with TSIG authentication, complete the following steps:

Enabling External Updates to the DNS Zone in the IdM Server
  1. On the IdM Server, add the following to the top of the /etc/named.conf file:

    ########################################################################
    
    include "/etc/rndc.key";
    controls  {
    inet _IdM_Server_IP_Address_ port 953 allow { _Foreman_IP_Address_; } keys { "rndc-key"; };
    };
    ########################################################################
  2. Reload the named service to make the changes take effect:

    # systemctl reload named
  3. In the IdM web UI, navigate to Network Services > DNS > DNS Zones and click the name of the zone. In the Settings tab, apply the following changes:

    1. Add the following in the BIND update policy box:

      grant "rndc-key" zonesub ANY;
    2. Set Dynamic update to True.

    3. Click Update to save the changes.

  4. Copy the /etc/rndc.key file from the IdM server to the base operating system of your Foreman server. Enter the following command:

    # scp /etc/rndc.key root@satellite.example.com:/etc/rndc.key
  5. To set the correct ownership, permissions, and SELinux context for the rndc.key file, enter the following command:

    # restorecon -v /etc/rndc.key
    # chown -v root:named /etc/rndc.key
    # chmod -v 640 /etc/rndc.key
  6. Assign the foreman-proxy user to the named group manually. Normally, foreman-installer ensures that the foreman-proxy user belongs to the named UNIX group, however, in this scenario Foreman does not manage users and groups, therefore you need to assign the foreman-proxy user to the named group manually.

    # usermod -a -G named foreman-proxy
  7. On Foreman server, enter the following satellite-installer command to configure Foreman to use the external DNS server:

    # foreman-installer --scenario foreman \
    --foreman-proxy-dns=true \
    --foreman-proxy-dns-managed=false \
    --foreman-proxy-dns-provider=nsupdate \
    --foreman-proxy-dns-server="IdM_Server_IP_Address" \
    --foreman-proxy-keyfile=/etc/rndc.key \
    --foreman-proxy-dns-ttl=86400
Testing External Updates to the DNS Zone in the IdM Server
  1. Install the bind-utils package:

    # apt-get install bind9
  2. Ensure that the key in the /etc/rndc.key file on Foreman server is the same key file that is used on the IdM server:

    key "rndc-key" {
            algorithm hmac-md5;
            secret "secret-key==";
    };
  3. On Foreman server, create a test DNS entry for a host. For example, host test.example.com with an A record of 192.168.25.20 on the IdM server at 192.168.25.1.

    # echo -e "server 192.168.25.1\n \
    update add test.example.com 3600 IN A 192.168.25.20\n \
    send\n" | nsupdate -k /etc/rndc.key
  4. On Foreman server, test the DNS entry:

    # nslookup test.example.com 192.168.25.1
    Server:		192.168.25.1
    Address:	192.168.25.1#53
    
    Name:	test.example.com
    Address: 192.168.25.20
  5. To view the entry in the IdM web UI, navigate to Network Services > DNS > DNS Zones. Click the name of the zone and search for the host by name.

  6. If resolved successfully, remove the test DNS entry:

    # echo -e "server 192.168.25.1\n \
    update delete test.example.com 3600 IN A 192.168.25.20\n \
    send\n" | nsupdate -k /etc/rndc.key
  7. Confirm that the DNS entry was removed:

    # nslookup test.example.com 192.168.25.1

    The above nslookup command fails and returns the SERVFAIL error message if the record was successfully deleted.

4.4.3. Reverting to Internal DNS Service

You can revert to using Foreman server and Smart Proxy server as your DNS providers. You can use a backup of the answer file that was created before configuring external DNS, or you can create a backup of the answer file. For more information about answer files, see Configuring Foreman server.

Procedure

On the Foreman or Smart Proxy server that you want to configure to manage DNS service for the domain, complete the following steps:

Configuring Foreman or Smart Proxy as a DNS Server
  • If you have created a backup of the answer file before configuring external DNS, restore the answer file and then enter the foreman-installer command:

    # foreman-installer
  • If you do not have a suitable backup of the answer file, create a backup of the answer file now. To configure Foreman or Smart Proxy as DNS server without using an answer file, enter the following foreman-installer command on Foreman and each affected Smart Proxy:

    # foreman-installer \
    --foreman-proxy-dns=true \
    --foreman-proxy-dns-managed=true \
    --foreman-proxy-dns-provider=nsupdate \
    --foreman-proxy-dns-server="127.0.0.1"  \
    --foreman-proxy-dns-tsig-principal="foremanproxy/foreman.example.com@EXAMPLE.COM" \
    --foreman-proxy-dns-tsig-keytab=/etc/foreman-proxy/dns.keytab

After you run the foreman-installer command to make any changes to your Smart Proxy configuration, you must update the configuration of each affected Smart Proxy in the Foreman web UI.

Updating the Configuration in the Foreman web UI
  1. Navigate to Infrastructure > Smart Proxies.

  2. For each Smart Proxy that you want to update, from the Actions list, select Refresh.

  3. Configure the domain:

    1. Navigate to Infrastructure > Domains and click the domain name that you want to configure.

    2. In the Domain tab, set DNS Smart Proxy to the Smart Proxy where the subnet is connected.

  4. Configure the subnet:

    1. Navigate to Infrastructure > Subnets and select the subnet name.

    2. In the Subnet tab, set IPAM to DHCP or Internal DB.

    3. In the Domains tab, select the domain that you want to manage using Foreman or Smart Proxy.

    4. In the Smart Proxies tab, set Reverse DNS Smart Proxy to the Smart Proxy where the subnet is connected.

    5. Click Submit to save the changes.

Appendix A: Smart Proxy server Scalability Considerations

The maximum number of Smart Proxy servers that Foreman server can support has no fixed limit. The tested limit is 17 Smart Proxy servers with 2 vCPUs on a Foreman server with Red Hat Enterprise Linux 7. However, scalability is highly variable, especially when managing Puppet clients.

Smart Proxy server scalability when managing Puppet clients depends on the number of CPUs, the run-interval distribution, and the number of Puppet managed resources. Smart Proxy server has a limitation of 100 concurrent Puppet agents running at any single point in time. Running more than 100 concurrent Puppet agents results in a 503 HTTP error.

For example, assuming that Puppet agent runs are evenly distributed with less than 100 concurrent Puppet agents running at any single point during a run-interval, a Smart Proxy server with 4 CPUs has a maximum of 1250-1600 Puppet clients with a moderate workload of 10 Puppet classes assigned to each Puppet client. Depending on the number of Puppet clients required, the Foreman installation can scale out the number of Smart Proxy servers to support them.

If you want to scale your Smart Proxy server when managing Puppet clients, the following assumptions are made:

  • There are no external Puppet clients reporting directly to the Foreman integrated Smart Proxy.

  • All other Puppet clients report directly to an external Smart Proxy.

  • There is an evenly distributed run-interval of all Puppet agents.

Note
Deviating from the even distribution increases the risk of filling the passenger request queue. The limit of 100 concurrent requests applies.

The following table describes the scalability limits using the recommended 4 CPUs.

Table 6. Puppet Scalability Using 4 CPUs
Puppet Managed Resources per Host Run-Interval Distribution

1

3000-2500

10

2400-2000

20

1700-1400

The following table describes the scalability limits using the minimum 2 CPUs.

Table 7. Puppet Scalability Using 2 CPUs
Puppet Managed Resources per Host Run-Interval Distribution

1

1700-1450

10

1500-1250

20

850-700